There are several ways to remove a stuck car key. First, you must determine the problem and then apply the correct procedure. This will help you avoid damage to the ignition and your key. You can also call for help.
When a key is stuck in the ignition, it can be frustrating. You may try to force the key to get unstuck, but this can actually damage the ignition. In some cases, the key can get broken, so you will need to replace it. If you do not have a spare key, you can see a mechanic or automotive locksmith for a replacement. Otherwise, you can use one of these tips to try to loosen the key.
To remove a stuck key, you will need to first turn the steering wheel. Turn the steering wheel in a counterclockwise direction, and the lock should release. You can do this by using a small metal object, such as a bottle cap, to push down on the wheel. Then, you can use a tack hammer to break up the lock.
Once the lock is released, you can start removing the key from the ignition. It will need to be depressed, which requires your left index finger. Depending on the type of key you have, you can use a wooden or rubber mallet to make the key straight again.
You can also lubricate the key with WD-40. This is a type of lubricant that can be applied to the key through the keyhole. Also, you can wiggle the key to loosen any debris inside the keyway.
A dead battery can also cause a key to get stuck in the ignition. If you can’t get it out, you can try jump-starting the vehicle, which will allow you to remove the key. However, if the key is still stuck, you can try replacing the battery or the ignition switch.
If the key is not stuck in the ignition, you can check the digital gear display and see if your vehicle is in Park or Off. If your vehicle is in Park, you can use the brake pedal to shift into neutral. On the other hand, if your vehicle is in Off, you can wiggle the steering wheel to get the lock to release. Alternatively, you can use a tow truck to remove the key.
Sometimes, a key can get stuck in the ignition because of a faulty shifter switch. In this case, you can try using a pliers to get it out. Alternatively, you can lubricate the key with a graphite powder or WD-40.
The best solution is to call a mechanic. He or she can inspect your car and fix the issue. Typically, you’ll have to present proof of ownership in order to obtain a new key. Getting a replacement can cost a lot, but it can be well worth it.
Getting a key out of the ignition can be a daunting task, especially when it happens while you are in a hurry. However, it is important to keep calm and be patient. With the proper tools and knowledge, you can successfully get the key out of the ignition.
Photo by Ivan Shemereko on Unsplash